TOFFEE-Mocha - WAN Emulator – Documentation

TOFFEE-Mocha Download and Documentation – TOFFEE-Mocha-1.0.14-1-rpi2 – Raspberry Pi WAN Emulator

By thelinuxchannel February 21, 2025 #Documentation, #download, #kiran kankipati, #Network Analysis, #Open Source, #Raspberry Pi, #The TOFFEE Project, #wan acceleration, #wan emulator, #WAN Optimization

TOFFEE-Mocha WAN Emulator Raspberry Pi Home Page Report

Download TOFFEE-Mocha-1.0.14-1-rpi2 via Google Drive share:

Raspberry Pi2/3 Install Image (binary): TOFFEE-Mocha-1.0.14-1-rpi2.img.tar.xz

Source: TOFFEE-Mocha-1.0.14-1-rpi2.tar.xz

NOTE: If you are looking TOFFEE-Mocha WAN Emulator for Intel x86_64 platform, you can find it HERE.

Here is my VLOG Youtube video of the same which includes details about version release notes, future road-map and so on.

Software Development Updates corresponds to this TOFFEE-Mocha release version:

NEWS :: TOFFEE-Mocha WAN Emulation software development – Update: 18-June-2016
NEWS :: TOFFEE-Mocha WAN Emulation software development – Update: 17-June-2016
NEWS :: TOFFEE-Mocha WAN Emulation software development – Update: 16-June-2016

User Guide (Documentation)

The TOFFEE-Mocha release is highly optimized and customized for Raspberry Pi 2/3 hardware platform. TOFFEE-Mocha for Raspberry Pi2/3 is built within the standard Raspberry Pi Raspbian Operating System (version: 2016-05-27-raspbian-jessie.img).

NOTE: For more details regarding TOFFEE-Mocha hardware test setup and deployment kindly refer: TOFFEE-Mocha WAN emulator Lab deployment and topology guide

NOTE: For more details regarding TOFFEE-Mocha test-cases and test-results kindly refer: TEST Cases – TEST Results – Raspberry Pi WAN Emulator with TOFFEE-Mocha-1.0.14-1-rpi2

Installation:

Unlike the x86_64 version, TOFFEE-Mocha Raspberry Pi version is a complete disk image of Raspberry Pi Raspbian OS in which TOFFEE-Mocha is ported, built and pre-installed. You can download the binary (the install image above), un-tar it and install on a microSD card which is around larger than or equal to 8GB capacity. Since this is the size of the microSD card upon which I built the TOFFEE-Mocha image.

If you are new using Raspberry Pi hardware, you can follow the standard official Raspberry Pi guide: Installing operating system images

If you are using a Linux system you can do via dd command as shown below. Assume in this case the empty microSD card is “/dev/sdc”

kiran@desktop-i7-5820k:~$ sudo dd bs=4M if=TOFFEE-Mocha-1.0.14-1-rpi2.img conv=sync,noerror of=/dev/sdc

Hardware: Additional NIC Card Installation

You can use a USB2 to 100Mbps NIC card so that you can get totally two network ports as shown below. Once it is installed you can check by booting the Raspbian OS and confirm via ifconfig command.

TOFFEE Mocha WAN Emulator Raspberry pi interfaces

Configuration:

Configuration of TOFFEE-Mocha Raspberry Pi version is as same as x86_64 version, you can refer the Configuration section of the TOFFEE-Mocha-1.0.14-1-x86_64 Documentation.